Where it fits.
A step up from MultiTrack 700 where the project needs greater tensile and puncture performance while retaining high water permeability.
Nonwoven geotextile · MultiTrack
CORE MultiTrack 1000
A full-roll nonwoven geotextile with 8 kN/m tensile strength in both principal directions and 1,500 N CBR puncture resistance for more demanding separation and filtration duties.
Manufacturer technical reference: MultiTrack 1000 · manufactured by Wrekin Products Ltd
Nonwoven · WhiteCBR puncture1,500 N
Water permeability110 L/m².s
Tensile strength MD / CMD8 / 8 kN/m
Start here when...
More robust general-purpose separation and filtration in civil and landscape works.
Nonwoven · White.
A permeable fibrous structure supports filtration, drainage and separation.
Primary functions
- Separation of soil and granular construction layers
- Filtration and drainage interfaces
- Improved puncture resistance over MT700
- Full-roll coverage for civil and landscape works
Typical applications
- Roads, car parks and industrial hardstandings
- Drainage systems, soakaways and SuDS
- Groundworks with higher installation-robustness needs
- Landscape and civil-engineering separation layers
CORE stocked formats
Roll sizes and codes.
Nominal area is calculated from the stated roll dimensions. Allow for overlaps, cuts, waste and project geometry when calculating quantities.
| CORE code | Roll size | Nominal area |
|---|---|---|
| GTNW/MULTITRACK | 4.5 m x 100 m | 450.00 m² |
Declared technical data
Performance by test.
Values are manufacturer-declared. MD means machine direction; CMD means cross-machine direction. Confirm the current Declaration of Performance for the exact supplied product before specification.
| Property | Declared value | Test / basis |
|---|---|---|
| Tensile strength - MD | 8 kN/m | EN ISO 10319 |
| Tensile strength - CMD | 8 kN/m | EN ISO 10319 |
| Elongation at maximum load - MD | 45% | EN ISO 10319 |
| Elongation at maximum load - CMD | 50% | EN ISO 10319 |
| Dynamic perforation resistance | 34 mm | EN ISO 13433 |
| CBR puncture resistance | 1,500 N | EN ISO 12236 |
| Water permeability | 110 L/m².s | EN ISO 11058 |
| Characteristic opening size | 120 µm | EN ISO 12956 |
| Predicted minimum durability | 100 years | Conditions not stated in source sheet |
| Maximum allowed time | 2 weeks | EN 12224 - source wording retained |
Document status
Manufacturer source lists CE and UKCA. Refer to the current manufacturer Declaration of Performance.
Manufacturer reference: MultiTrack 1000 · GTNW/MULTITRACK
Range comparisonDo not substitute
Do not substitute
by weight alone.
Compare the function and the full set of declared properties. A woven and nonwoven product can both separate layers but behave differently under load and water flow.
| Product | Type | Tensile MD / CMD | CBR puncture | Water permeability | Opening size |
|---|---|---|---|---|---|
| CORE TerraTrack Lite | Nonwoven | 6.5 / 6.9 kN/m | 1,100 N | 120 L/m².s | 110 µm |
| CORE TerraTrack Pro | Nonwoven | 21.5 / 21.5 kN/m | 3,700 N | 60 L/m².s | 80 µm |
| CORE MultiTrack 700 | Nonwoven | 6 / 6 kN/m | 1,000 N | 120 L/m².s | 140 µm |
| CORE MultiTrack 1000 | Nonwoven | 8 / 8 kN/m | 1,500 N | 110 L/m².s | 120 µm |
| CORE FasTrack 609A | Woven | 18 / 10 kN/m | 1,500 N | 16 L/m².s | 300 µm |
| CORE FasTrack Orange | Woven | 18 / 10 kN/m | 1,500 N | 16 L/m².s | 300 µm |
General installationKeep it intact
Keep it intact
until covered.
Follow the project method statement and current manufacturer guidance. The steps below are useful principles, not a substitute for application-specific design or inspection.
Store and protect
Keep rolls securely stacked and wrapped until required. Protect the fabric from damage and unnecessary exposure.
Prepare the subgrade
Remove shrubs, large rocks and similar obstructions. Fill deep ruts, voids and depressions to provide a smooth support.
Roll out to the contours
Keep the textile taut enough to minimise folds, but do not stretch it so that it bridges hollows. Temporary ballast may be needed in wind.
Maintain continuity
General manufacturer guidance is at least 300 mm overlap side by side and 600 mm end to end. Increase overlaps on soft or uneven ground.
Place cover fill safely
Do not traffic directly on exposed geotextile. End-tip onto the edge or already placed fill, then spread using suitable tracked plant.
Cover, inspect and repair
Provide at least 150 mm cover before trafficking or compaction. Repair damage with the same textile extending at least 1,000 mm beyond the affected area in every direction.
Cover promptly.
The current general installation guide says temporary uncovered exposure should not exceed seven days. Where a source product sheet states another EN 12224 value, use the more conservative limit unless the current Declaration of Performance confirms otherwise.
Technical resourceCORE MultiTrack 1000
CORE MultiTrack 1000
data sheet.
Two pages covering CORE stocked formats, declared technical values, installation principles, limitations and manufacturer traceability.
Selection limits
Check before specifying.
- The source sheet gives a predicted minimum durability of 100 years but does not state the conditions on the printable product page.
- The source sheet's two-week EN 12224 field is retained as declared data; follow the more conservative installation instruction to cover exposed fabric promptly and within seven days.
- Constituent material and mass per unit area are not stated in the source product sheet supplied to CORE.
Product questions
Straight answers about the grade, its role and its limits.
When should I choose MT1000 rather than MT700?
Choose MT1000 when the project needs the higher 8 kN/m tensile strength and 1,500 N puncture resistance, subject to the required filtration and installation conditions.
Are mini-roll MT1000 formats available from CORE?
CORE's current range uses TerraTrack Lite for mini-roll nonwoven supply. MultiTrack 1000 is listed as a 4.5 m x 100 m full roll.
Does the 100-year durability figure apply to every environment?
The current source sheet states predicted minimum durability of 100 years but does not print the applicable conditions. Confirm the current Declaration of Performance for the intended exposure and soil conditions.
Technical project support
Discuss MultiTrack 1000.
Send the build-up, application, quantities and site information you have. CORE can help confirm the intended function, stocked roll size and any information still needed before specification or supply.
CORE Landscape Products: 5.0 / 5 · Excellent on Trustpilot from 533 reviews